How to build your own multi-purpose loom!

This post is for all of you DIYers that are interested in building a nice, portable, standing weaving loom. This is the same loom I use for darn near everything I weave. It costs less than $50 to make. The pdf file is free to download. You can sell all of the looms you want. DO NOT sell my pattern.

Rug_cardweaving_loom

The following pictures are merely for reference while you’re building your loom. Please, if you have any questions, contact me and I’ll do the best I can to help. (And yes, the little folding loom on the floor, to the left of the standing loom, is a tapestry loom that I also made. When time permits, I will do up the instructions for this one as well.)

My beautiful picture

My beautiful picture

My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture finishing attaching the warp to the bottom beam half of the warp up first cards up DSCF1012 The backside of the dragon's breath weaving On the loom My beautiful picture

The above photo of the loom has a rug on the front side of it and I turned it around to start a card weaving (it’s the dog leash I currently walk Princess Vanity with)!!

Get busy and weave something!!!

Advertisements

My latest card weavings.

A couple of weeks ago, I started warped my loom for another running leaves card woven band/strap/belt. It turned out to be too wide to be a dog leash, so I’ve decided that it will make a great guitar strap or belt.

These pictures are of the 3 yard warp; on the loom (a standing rug/navajo weaving loom); and the first few inches woven.

3 yard warp for 16 card weaving  On the loom beginning of running leaves

Cut off the loom and almost finished.

Cut off the loom Ready to finish showing off the running leaf pattern

This is 2 inches wide and 6 feet long.

Ready to weave in ends and wet finish.

The next card weaving project. This is a green, gold and black, dragon breath weaving on 22 cards. The finished strap will be 3 inches wide and about 6 feet long.

pattern and cards ready first cards up half of the warp up

last card to put up finishing attaching the warp to the bottom beam Ready to start

Here’s what was accomplished Monday & Tuesday.

The backside of the dragon's breath weaving DSCF1016 DSCF1015

I think I’m going to experiment with the dragon’s breath pattern for awhile because I really like the way you can customize it!!

Thanks going out to Guntram and his fantastic card weaving Thingy that he invented to make all of this creating possible!!

I know I’ve not blogged in awhile!

I’ve not blogged in awhile because the farmers market season got into full swing and I’ve been super busy creating things, restocking the things that do sell, and working hard at beefing up my displays. I’ve not had the best luck with displays and I really do hate putting up and taking down my tent. Natural lighting is what suits my fiber products best and I would prefer to display in natural lighting.

Now that I’ve taken a few weeks off, I’ll try and whip up a post sometime tomorrow about my latest adventures in the wonderful world of card-weaving!!

Til then, get some fiber and get spinning!

Card weaving or tablet weaving (they’re the same thing).

There’s a lot of talk and publicizing of card weaving and tablet weaving right now. This is something I’ve been doing for the past 4 or 5 years and I knew it wouldn’t be long before it would be swinging its circle back to being popular again. I’m always amazed at how cyclic the trends are and how everything old and suddenly becomes ‘new’ again.

All that said, I figured I’d just do up another blog post, with all the pictures of nearly all of my card weaving endeavors, including my hand-made cards. I’ve also shared a couple of tutorials I’ve published in the past.

This is the first guitar strap I made for a friend in Milwaukee. It measured 6 feet long by 3 inches wide when it was finished. He requested acrylic yarns only because he didn’t know much about wool yet. I originally started out with playing cards cut into weaving tablets.

My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture  My beautiful picture

 

This was a 2-sided (exactly the same on both sides) Anglo-Saxon braid card weaving that I did next. It became an adjustable belt. It’s 100% from my hand spun, hand dyed wool yarns! All of it is Suffolk from the Ahrens’ Suffolk sheep!

My beautiful picture My beautiful picture My beautiful picture

My beautiful picture My beautiful picture My beautiful picture My beautiful picture

 

At this point, I considered buying some weaving tablets/cards because the playing cards pretty much wore out after about 5 weavings. I made another set of playing card tablets and then I started playing around with all of the plastic containers we had around the house. A year after I perfected something I liked, I created this Instructable for them (http://www.instructables.com/id/Card-weaving-how-to-make-your-own-cards-from-rec/). Cat litter jugs and milk jugs work the best!

My beautiful picture My beautiful picture My beautiful picture My beautiful picture

 

As you can see, I use a rug loom to do my card weaving. I prefer standing and I prefer weaving top down. The skinny ones became dog leashes and the wide ones became belts or guitar straps. The last one, on the triangle weaving cards was acrylic (another special request).

My beautiful picture My beautiful picture

My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture My beautiful picture

 

I also discovered that I love triangle weaving. That patterns that can be created are unfathomable, but that will have to be for another post while I learn more with the triangle cards. Both of these became dog leashes also. The first one is acrylic. The 2nd and 3rd ones are my hand dyed, hand spun wool yarns.

My beautiful picture My beautiful picture My beautiful picture

 

During all the madness, I decided I needed a more portable way to card weave, so I made a back strap loom and designed and built a wooden, portable card weaving loom.

My beautiful picture My beautiful pictureMy beautiful pictureMy beautiful picture My beautiful picture My beautiful picture

 

This first one didn’t work out so well because I realized I needed to be able to pass the shuttle back and forth, unimpeded.

My beautiful picture My beautiful pictureMy beautiful picture

 

 

This ‘minor’ modification, using a jigsaw, turned out just right (and yes, I still use playing cards to weave with because it seems I end up selling off my recycled plastic ones.

My beautiful pictureMy beautiful picture My beautiful picture

 

Here is the video of me demonstrating triangle card weaving. I did all of the editing with help from my friend, Azharuddin Khan!

 

Also, a special thanks goes out to Guntram for creating awesome, free software to design all of those designs you want to create. His software comes with a bazillion preprogrammed patterns, but also allows you to design your own and save them all. The software is called, Guntram’s Card Weaving Thingy!

As always, if this prompts you to want to start card weaving and you’d like some nice, slippery cards that don’t tip over while you’re weaving (unless you want them to), see my etsy listing for them.

https://www.etsy.com/listing/128994950/1-dozen-unmarked-card-weaving-cards-made

Get busy and make something!!